SignGo Home
 
  Welcome, Guest. Please Login or Register
 
  HomeHelpSearchLoginRegister  
 
Page Index Toggle Pages: 1
How do I drive my Creation Cutter? (Read 3085 times)
10. Nov 2004 at 01:30

Kevin Wallace   Offline
Global Moderator
SignGo Support

Posts: 796
*****
 
Creation PCUT CT series cutters are supported.

CT Series fitted with USB Port
This model may actually be labelled as CR Series. You can identify the actual series type by looking at the display when you switch it on. It will display CT or CR accordingly. CT Series uses a virtual COM port driver. If you are having problems please ensure you download the newest driver from here.

CT Series fitted with Serial/Parallel ports
Please click here  for full details.

CR Series USB
The CR series (pure USB) is supported by SignGo from Version 1.17. You can identify the CR Series by looking at the display when you switch it on. It will display CR if it is fitted with a "pure USB" port. If it is fitted with a virtual COM port it will display CT, in which case refer to above. Note:
The CR series does not support contour cutting.

« Last Edit: 18. Apr 2009 at 16:15 by Kevin Wallace »  
IP Logged
 
Page Index Toggle Pages: 1