SignGo Home
  Welcome, Guest. Please Login or Register
Page Index Toggle Pages: 1
Serial Cable Pinouts DB9 to DB25 - General (Read 2690 times)
16. Oct 2002 at 23:52

Forum Admin   Offline
YaBB Administrator
Signgo Admin Land

Posts: 27
Connects the cutters 25-pin serial port to a 9-pin serial (COM) port on the computer.

This cable should work with most cutters such as Roland, New Star/DGI and Graphtec. Not suitable for use with Houston/Summagraphics cutters.

Uses DTR/DSR flow control.

This information is provided for guidance only. Always check the manufacturers documentation.

IP Logged
Page Index Toggle Pages: 1