SignGo Support Forum
http://www.signgo.com/cgi-bin/yabb2/YaBB.pl
Signgo Support Information >> Tips and Tricks >> How To Create Plot File
http://www.signgo.com/cgi-bin/yabb2/YaBB.pl?num=1389015070

Message started by Kevin Wallace on 06. Jan 2014 at 13:31

Title: How To Create Plot File
Post by Kevin Wallace on 06. Jan 2014 at 13:31
A plot file is a data file containing instructions a cutter can understand. Plot files can be used to exchange outline data between other programs, for troubleshooting and for cutting data on a plotter that supports memory cards.

Wissen programs create plot files using the Cut command. This means you can create a plot file tailored to any cutter. If you want to use a plot file to transfer outlines to another program use the Generic HPGL driver.

To Create a Plot File
[list bull-blackarrow]
  • From the File menu choose Cut or Cut selection. The Cut window appears.
  • Click the Cut tab. Choose the cutter driver required from the Current cutter list.
  • Click the Setup button. The driver options window appears:

    Type a path and filename into the editbox labelled Connect.
  • Click OK.
  • Click the Start button to create the plot file.

  • SignGo Support Forum » Powered by YaBB 2.5.2!
    YaBB Forum Software © 2000-2021. All Rights Reserved.