SignGo Support Forum
http://www.signgo.com/cgi-bin/yabb2/YaBB.pl
Signgo Support Information >> Cutting Issues >> Serial Cable Pinouts DB9 to DB9 - Houston/Summa
http://www.signgo.com/cgi-bin/yabb2/YaBB.pl?num=1034784238

Message started by Forum Admin on 17. Oct 2002 at 00:03

Title: Serial Cable Pinouts DB9 to DB9 - Houston/Summa
Post by Forum Admin on 17. Oct 2002 at 00:03
Connects the cutters 9-pin serial port to a 9-pin serial (COM) port on the computer.

This cable should work with Houston/Summagraphics cutters fitted with a 9-pin COM port. XON/XOFF flow control is recommended.

This information is provided for guidance only. Always check the manufacturers documentation.


SignGo Support Forum » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2021. All Rights Reserved.