SignGo Support Forum
http://www.signgo.com/cgi-bin/yabb2/YaBB.pl
Signgo Support Information >> Cutting Issues >> Serial Cable Pinouts DB9 to DB25 - General
http://www.signgo.com/cgi-bin/yabb2/YaBB.pl?num=1034783545

Message started by Forum Admin on 16. Oct 2002 at 23:52

Title: Serial Cable Pinouts DB9 to DB25 - General
Post by Forum Admin on 16. Oct 2002 at 23:52
Connects the cutters 25-pin serial port to a 9-pin serial (COM) port on the computer.

This cable should work with most cutters such as Roland, New Star/DGI and Graphtec. Not suitable for use with Houston/Summagraphics cutters.

Uses DTR/DSR flow control.

This information is provided for guidance only. Always check the manufacturers documentation.


SignGo Support Forum » Powered by YaBB 2.5.2!
YaBB Forum Software © 2000-2021. All Rights Reserved.